Filter Mount

Includes:
• 1/4" Aluminum Bracket for mounting a bottom facing oil filter to original AC compressor location
• Optionally: Filter mount that bolts to the above bracket and allows a filter to spin on with two 1/2"NPT inlet and outlet holes. Can use a Wix 51515 or similar filter to increase filter capacity significantly. Customer will need to provide their own mounting hardware (3 bolts and nuts) for this option.

*Note: There are two possible ways to weld the mounting bracket - bottom parallel to the ground (22 degrees from the engine block) for use with the OEM oil pans, or Normal to the block (sticking straight out) which puts the bottom of the bracket a 22 degree angle to the ground for use when the engine is equipped with a Moroso pan that kicks out under this area. Please let us know what oil pan you are using.