Keypads ship with the keypad, a short 8-10" harness to plug directly into the keypad, a 18-24" CAN extension harness, and 5 page sticker pack for the buttons.
NOTE: If you plan to use this with a Link ECU, it will likely require custom CAN programming to make it functional with the Link. IF you would like KO Racing to perform this unlock and enable default Link communications with the keypad, it will require a fee and the keypad will be non-refundable and non-returnable.
NOTE: The CAN H and CAN L wires on the Haltech keypad harness do need to be swapped to be compatible with the Link CAN wire positions if using with Link CAN 4 Pin DTM connections. KO Racing can also perform this pin change for you for a fee. This will also make the keypad non-returnable.
